Edit: Thank you to Curt Monash who points out that Netezza is available for as little as $20k/TB/year with hardware (and 2.25x compression) and that there is an inconsistency in my early price estimates and the fraction I quote in my conclusion. I’ve incorporated his observations into my corrections below. I’ve also changed a sentence in the conclusion to make the point that the $5k/TB/year TCO number is the effective TCO given that a Redshift cluster that can perform these queries at the desired speed has far more storage than is needed to just hold the tables for the workloads I tested.
Author’s Note: I’ll preface this post with a warning: some of the content will be inflammatory if you go into it with the mindset that I’m trying to sell you on an alternative to Hadoop. I’m not. I’m here to talk about how an MPP system blew us away, as jaded as we are, and how it is a sign of things to come. There’s enormous, ripe-for-the-picking business value in Redshift and you’d be remiss to ignore it because “we’re a Hadoop shop” or “commercial MPP is too expensive”.
Flash back a few years: We’d struggled mightily with commercial data warehouses that simply couldn’t load the data volumes we wanted to query (at that time this was significantly less than a billion rows) in any decent amount of time, let alone query them semi-interactively. Anecdotally, we’d hear that vendor X had solved our problem or vendor Y had a completely different model that would “completely blow us out of the water“, and so on, but either the prices were astronomical ($100k/TB/year +) or the performance didn’t pan out. In our minds, MPP solutions were a non-starter.
To oversimplify the design we chose for our infrastructure: we built the Summarizer and threw in some Postgres for our product reporting needs, mixed in some Elastic Map-Reduce for the “tough” jobs, and went about our business. We’re very happy with the Summarizer because it solves a particular business need very inexpensively. (We do all of our aggregation on one box and let a couple of Postgres boxes handle the querying.) However, our EMR bill was becoming pretty large, and for what? A handful of reports that weren’t (yet) feasible to do in a streaming setting like the Summarizer. That’s it. Did a handful of reports really merit the enormous cost and capability of Hadoop? Our gut always told us no, but who are we to argue with a working solution? We had other fish to fry.
Fast-forward to (nearly) the present day: the business has grown, and we have ourselves a medium-to-large data (1-200TB) query problem and some cash to solve it. That old ache in our gut told us it was time again to poke our heads up and see if Spring had come. A bit of catching up on research revealed the tradeoff to be the same as ever, either:
- sign a fat check for Greenplum/Teradata/Aster/Vertica/ParAccel/Kognitio/Infobright/Oracle/IBM/SAP/Microsoft etc… and pay per terabyte per year, or
- hop onto Hadoop and ride the open-source rodeo with Hive or Pig by your side.
(Sure, sure there are other open-source options out there that aren’t Hadoop, but for example Impala 1.0 just came out and Drill’s nowhere near ready for production.)
Our first question was: “How much are we willing to spend?” Running a Hadoop cluster in-house or on EMR isn’t cheap, and avoiding some of its hassles is worth something too. The answer varied depending on the vendor, but word on the street was
$25k/TB/year $20k/TB/year to $600k/TB/year. We were still stuck between a rock and a hard place: Hadoop was cheaper than the data warehouses, but so much more tool than we needed.
Present day: we hear about AWS’s Redshift offering. It’s basically ParAccel, a columnar, compressed data warehouse that a bunch of AWS engineers “cloud-ified”. I won’t lie, our first reaction was incredulity and dismissive chuckles followed by “Sure, ‘petabyte-scale’. Bet we can break this one with a few days of data.” At their claimed $1k/TB/year TCO, it seemed impossible that they could offer a product that worked. To prove our point, I fired up a few instances, and found out that we were flat out wrong.
I’m going to try to convince you that Redshift is worth a look by showing you the results of a handful of non-trivial tests I ran, not much more. What’s more is that I’m not going to whitewash any of the issues I ran into. I’m going to tell you about some pretty ugly lumps on this sucker, but by the time I’m done I don’t think it will matter. I think you’ll come to the same conclusion we did: for the price, Redshift is an exceptionally powerful tool that almost any medium data business can use to solve all of their exploration problems for a reasonable price.
I’m here to tell the story of how Amazon and MPP caught up in a big way, and how Redshift is the real deal.
I’ll give you the standard caveats: I ran tests on our data, which has a certain shape, a certain size, and a certain density/sparsity with respect to our reporting keys. Yours may be different. My methods may not work well on your data. In all likelihood, however, if your data is human-generated advertising behavioral data or something like it, Redshift is going to work pretty well with it.
Ground rules for using Redshift
- Your data must be flat, in a CSV/TSV/*SV format. No nested structures.
- Your data must be loaded from S3 or DynamoDB.
- Your data should have a natural group of columns to sort by (that suits the queries you want to run). Your data should also have a column by which it can be evenly distributed across the cluster, when consistently-hashed.
- Result sets come out via JDBC/ODBC (don’t do this for anything bigger than a few thousand rows) or are shipped out to S3.
Overview of my tests
6 cluster configurations. 1x, 4x, 16x, 32x dw.hs1.xlarge, and 2x, 4x dw.hs1.8xlarge. (For brevity’s sake, I’m going to refer to the node types as ‘xlarge’ and ‘8xlarge’ from here on.)
4 data sets. 2B rows, 10B rows, 44B rows, 57B rows in the main fact table. As gzip’d CSV they ranged from 80GB to 2.4TB.
Not all data sets were run on all clusters. Anything smaller than 16x xlarge/2x 8xlarge was simply too slow for the larger (read: more realistic) data sets. I tested them to the point where I could safely rule them out for our workloads and then moved up to the next cluster.
Standard data warehouse table setup. About a dozen numeric columns per table. The largest table (impressions) is 100x larger than the next biggest table (clicks), and 5000x larger than the smallest table (conversions). All tables sorted by date and by user id (SORTKEY), distributed by user id (DISTKEY).
Two types of queries. (pardon the pseudo-SQL, see Appendix for full queries)
SELECT keys, aggregates FROM all_tables_unioned WHERE date_predicate GROUP BY keys
WITH windowed_query_over_user_sessions, SELECT keys, session_statistic_value, COUNT(*) FROM windowed_query_over_user_sessions WHERE date_predicate GROUP BY keys
That is, (1) a basic aggregate report with some hard stuff like COUNT(DISTINCT), and (2) a windowed walk over user sessions that computes a histogram of a certain statistic about certain ads. Think a histogram for each ad of how many times it shows up as the last thing (impression/click/conversion) in a session, the second-to-last-thing in a session, and so on. The catch is we’re not specifying a particular campaign or advertiser for which we’re running these reports. We’re computing everyone’s reports all at once, just to push the envelope a bit.
As I mentioned earlier, we walked into this with no small amount of incredulity. We’ve spent a lot of engineering effort keeping ahead of the billions of events we see each day, and as a result our expectations have grown. I mean, if a handful of loons like us can keep up, Amazon’s insane resources should be miles ahead of us, right?
So, I’m going to say some unreasonable things in this section and they should be taken with a grain of salt. For example, when I say I should be able to add nodes to my cluster “quickly”, I mean that I should be able to so within the limitations of copying data across a network, I shouldn’t have to babysit the data transfer, and I shouldn’t have to provision the boxes myself or reconfigure anything. I should be able to click a button, and so on.
- Per dollar, I want linear scaling. Period. Load, query, etc… If I’m paying more, it should be faster!
- I want my dollar to be just as well-spent on a xlarge cluster as a 8xlarge cluster. That means 8xlarge should be “worth” xlarge instances. (I test here.)
- I want to load the marginal “day”, about 2B rows for our purposes here, in an hour and I should be able to rerun my queries with linear scaling in the new number of rows.
- I want to be able to painlessly and quickly add nodes to my cluster.
- I want linear degradation in query times for parallel queries. (Two queries at once will run in twice their normal time, and so on.)
- I want to be able to shut down and take a snapshot quickly. I want to be able to start a cluster from a snapshot quickly. (Because if I can, I’d like to turn this thing off when I’m not using it, so I don’t have to pay for it.)
Starting a cluster and loading data into it
Starting a cluster, regardless of what size and type, took between 3 and 20 minutes. No rhyme or reason. Once the cluster was up, I would issue queries via psql from a t1.micro in the same zone and security group in order to avoid a firewall timeout issue which will kill long-lasting connections from outside of EC2. The result sets were gzip’d and sent to S3 directly from the cluster.
Each data set had its own S3 bucket and was distributed over hundreds of gzip’d files in that bucket. I started by trying to load the whole bucket at once with something like
COPY impression FROM "s3://test-data/impressions/" WITH CREDENTIALS ... GZIP DELIMITER ',' MAXERROR AS 100000;
This worked for the smallest data set, but as soon as I moved to the larger ones I would see errors like:
ERROR: S3ServiceException:speed limit exceeded,StatusCode 500,ErrorCode N/A,RequestId N/A,ExtendedRequestId N/A,CanRetryException 1 DETAIL: ----------------------------------------------- error: S3ServiceException:speed limit exceeded,StatusCode 500,ErrorCode N/A,RequestId N/A,ExtendedRequestId N/A,CanRetryException 1 code: 9001 context: S3 key being read : impressions/201.csv.gz query: 1446 location: table_s3_scanner.cpp:355 process: query1_s9_2 [pid=5471] -----------------------------------------------
and the whole load would fail. (A failed load leaves the database in the prior, intact state, so you don’t have to worry about being in a halfway-loaded state.) I started splitting the loads into smaller chunks of about 100 files, but sometimes those would fail too. I ended up splitting them into groups of 10-20 files (3GB-60GB total) and those would succeed very reliably. The tradeoff is that there is an overhead to starting up and winding down a new COPY command, so the fewer COPYs, the better for overall load speed.
As you can see, there are dips in CPU utilization/network throughput between COPYs that isn’t present on loads that grouped more files together. The dips come from an initial analysis phase before the download and a final sort phase after download. I saw a 40% decrease in load speed when I went from 200 files-at-a-time to 20 files at a time for the same data set.
Once I had settled on a sane way of chunking the loads, the overall COPY speed scaled linearly with cost and with data size, measured over hundreds of chunked loads. I was also pleasantly surprised to find that there was very, very little variability within the load times, when controlling for chunk size and file count. Each xlarge node could load about 3.17MB/sec of compressed S3 data or 78k rows/sec and each 8xlarge node could load about 23.8MB/sec or 584k rows/sec, meaning one of the latter was worth about 7.5 of the former while costing 8 times as much. Roughly speaking, every extra dollar spent bought a marginal 3.5-3.7MB/sec in load speed. In row throughput, each marginal dollar gave us an additional 80-100k rows/sec. The plots below are averages of the chunked load times grouped by data set and cluster. (The costs are all in terms of the on-demand, un-reserved instance costs.)
There is an outlier in the load time for the 2B row data set on the 16-node xlarge cluster (lavender circle). I believe that this was caused by the relatively high node count compared to the relatively small file count and data size. Informally, I saw this regression on both 16- and 32-node clusters for data sets with fewer than 200 files and less than 100GB of data. Overall, you can count on equally-priced xlarge clusters outperforming their 8xlarge peers by 5-20% in COPY times as long as the number of files and total sizes are large enough. (That said, there is a 32-node limit on xlarge clusters, so after a certain point your hand will be forced and you’ll have to move to the larger nodes.)
After loading the data, it is a best practice to VACUUM the tables to ensure that the rows are all in sorted order. Each COPY will sort the rows in that load, but will not merge them into the existing sorted rows. Not VACUUM’ing will force your queries to execute over the multiple sorted sections (which I’ll call partitions), which can significantly diminish performance on queries that depend heavily on the sorted order of the data. For queries that didn’t take advantage of the sorted-order of the data, the difference between the VACUUM’d data and the load-partitioned data was minimal until I hit dozens of partitions. For queries that did rely on the sorted-order for their execution, I saw a night-and-day effect: either a minor (1-5%) degradation in query time or the query wouldn’t finish for tens of hours. In general, I’d just pay the cost of VACUUMing to avoid the edge cases where the queries would implode.
The plot below shows the VACUUM rate per dollar/hour in both types of clusters, for on-demand, non-reserved instances. (I know the units obfuscate the real performance, but it’s just to normalize clusters within their node type and across node types.)
Per dollar, the primary driver of the VACUUM rate was how many rows were already present in the table before COPY (assuming they were already VACUUM’d themselves.) xlarge clusters performed 10-25% better on VACUUMs than their 8xlarge counterparts, on similar workloads.
Is it feasible to load 2B more rows in about an hour with any of the clusters? Not the way I have my data set up, it isn’t. The COPY part is easy. It would take less than half an hour to COPY onto the 2x 8xlarge and 16x xlarge clusters, but the VACUUM wouldn’t be nearly so quick. With over 50B rows already in the table, both node types struggle to VACUUM more than 200k row/sec, which means at least 3 hours of VACUUM time. I suspect if I had manually split my tables into smaller chunks (say 10B-20B rows) like the docs told me to, I would have been able to COPY and VACUUM the 2B extra rows in just about an hour and a half.
Aside: let’s just do the math quickly from the plot above. Say we’re talking about a 8xlarge cluster with two machines. Say I have about 15B rows in my table and I’m adding 2B more. I’ll eyeball it and say that I could do 45k rows/sec/$. That cluster costs $13.60/hour. That means I should see a VACUUM rate of about 612k rows/sec. That means it should take about 55 minutes. The plots earlier showed that the same cluster could load at a rate of 1.1M rows/sec. That means 2B rows get COPY’d in 30 minutes. Like I said, about an hour and a half.
For loading, I saw linear scaling per dollar and observed just a bit worse than the 8:1 price ratio between the small and big nodes. I could also load my marginal day in about the time I wanted. Not bad for a start.
Note: I know I haven’t mentioned anything here about column compression, which is a big selling point of Redshift. My objective in this testing was to see how Redshift performed “out-of-the-box”, which meant leaving it to its own devices for compression. It seems like it’s own devices are quite good: the compression types it selected for the columns were exactly what I would have chosen, knowing the exact column statistics. Furthermore, the reported storage used by Redshift was only 1.6 times greater than the original GZIP’d files for all three data sets, which meant that about 115B rows fit into a little under 8TB of cluster storage. A 2-node 8xlarge/16-node xlarge cluster comes with 32 TB of cluster storage, meaning I could run a 24/7 cluster with about 450B rows in it for $70k/year with a 1-year reserve purchase. For a more tactical perspective, 450B/year equates to an average of 14k events/sec ingress for the whole year straight. Just buying 16 machines that look like xlarge instances would probably cost around $50k. If you factor in amortization over three years, we’re looking at a (3 x $70k) – $50k = $160k difference to cover any other operating expenses such as ops salaries, MPP licenses, and facility costs. A ParAccel license for $1k/TB/year alone would cost about $100k for those three years, and that would be a damn cheap license. (For a 30TB cluster over three years, a $2500/TB/year license alone would be more than the all-in AWS cost!)
Querying the data
As I mentioned above, I tested two classes of queries:
- a simple aggregation that is only restricted by a date predicate, and
- a windowed walk over user sessions, computing and aggregating statistics for those sessions.
The first query class is the bread and butter of our reports, but was actually a very challenging query in the table setup described above because the table is only sorted by one of the six GROUP BY columns (date), which means that either a giant hash map of all the keys (of which there were 10s of millions) needed to be populated for each day, or the whole data set had to be resorted according to those keys. The balance I tried to reach when defining the schema was to make the “impossible” queries (#2) easy even if I had to sacrifice performance on the simpler queries. In a production situation, I’d probably have two schemas side-by-side, one sorted for the first class of queries, and another for the second given how much storage Redshift nodes come with.
Though this query does have a date predicate, the plot below is the average execution time for multiple runs with a predicate that includes every row in every table.
As you can see, the identically-priced xlarge cluster is about three times faster for the two largest data sets, and finishes the query on the 57B row data set in about three hours. The xlarge cluster query times degrade linearly with the number of rows in the data set, right up until the last data set where there’s a clear super-linear jump. The 8xlarge cluster, from the start, seems to degrade almost-quadratically.
The poor performance of the 8xlarge nodes was very surprising. I would have expected that the cost of shuffling/merging results across 16 nodes would hurt more than having 16 separate nodes helped. (Recall that the DISTKEY was in no way connected to the reporting keys of this query.) Just as in the COPY section, the distribution of work over nodes seems to be more efficient than the distribution of work over cores, as shown by the (more) graceful degradation of performance of the xlarge cluster. (This will be a recurring trend.)
The second class of queries walked over users’ sessions and produced histograms of how many times each ad appeared in various positional offsets and date offsets from the end of a user’s session. I also produced a version of the query than ran only on user sessions that contained at least one conversion. (In this data set, approximately 1 in 250 users are converters.)
As you can see, clusters composed of many small nodes bested their large-node counterparts by about 20% on all but the population date histogram query, where the small nodes were five times faster. The more-selective versions of the two queries were at least an order of magnitude faster than their ‘Population’ counterparts on the same clusters. Of course, it’s nowhere near a one-to-one speedup with the selectivity of the converters predicate, but going from 90 minutes to 7.5 minutes is impressive given that there’s a non-trivial join from a 57B row table to a 20M row table happening in the “Converters” queries. The query times clearly degrade linearly in the number of rows in the data set, perhaps with the exception of the date histogram for the population.
Similarly, query times halved (approximately) when I doubled the number of nodes in the cluster, in both clusters, for the battery of queries over the largest data set. (Apologies ahead of time for not synchronizing the colors of the queries between the plot above and the one below. It’s just a real pain.)
Note the above graph has log-scaled query time to demonstrate that both types of clusters see linear or better-than-linear per-dollar scaling on all of the queries I performed. Note, also, that certain queries improve more per dollar over the transition in the 8xlarge cluster. (Unfortunately, I couldn’t explore this comparison any further because of Amazon’s 32-node limitation for dw.h1.xlarge clusters.)
So I won’t say that I saw linear scaling across rows and nodes, but I will say this: it was pretty close to it. It’s clear that my 16-node xlarge cluster’s linear-ish performance was starting to fall apart on queries that had to touch more than 50B rows (the little uptick seen between the last two data points.) But let’s just back that up for a second. The cluster assembled and walked 4B sessions and computed the histograms for approximately 100,000 distinct ads in just under two hours. When restricting to converters, this happened in just over three minutes. I thought I had written the wrong query the first time the query returned that quickly, so I went back and wrote even more thorough unit tests for it. After convincing myself I had the right query, I restarted the cluster and reran the query to find it had once again run in the same amount of time, to the second. And then I did it again, and it was off by a few seconds. And again, and again, and again. I saw this repeated in all of my queries: the standard error on query time hovered around 1% for the most variable queries.
To get back to my point about business value, I caused a small riot among the analysts when I mentioned off-hand how quickly I could run these queries on substantial data sets. On a service that I launched and loaded overnight with about three days of prior fiddling/self-training. Sure, putting this into production is a whole other beast, but I contend it’s no worse than the alternative of trying to keep a Hadoop cluster running or trying to reliably process jobs. And I don’t even have to teach any of the analysts a particular flavor of SQL. They get to reuse the Postgres-flavored stuff that they know and love.
I’ll quickly throw down some caveats/lessons-learned on querying:
- Running any two of those queries at the same time doubled the nominal execution time of each individually. Three at a time tripled it plus change. At four, however, the cluster crawled to a halt and took about 10x the time. At five concurrent queries, the cluster went into an unhealthy state and rebooted, losing all history of the concurrent queries. The takeaway is that you really need to implement work-load management (WLM) if you’re going to run concurrent queries on the cluster.
- Learn to cancel queries before you run anything serious, and be sure to EXPLAIN and analyze them, as you can often avoid costly writes to disk by simply adding redundant predicates and inlining WITH clauses.
Snapshotting a cluster
Snapshotting is a relatively painless process through the UI. It’s as simple as clicking a button and obeying some unreasonably-strict naming policies. I turned off the auto-snapshotting and managed mine manually because I found the periodic dips in performance caused by the auto-snapshotting very annoying. Backing up my 4-5TB cluster reliably took 2-3 hours, which means I was getting about about 400MB/sec to S3 from my 2-node 8xlarge/16-node xlarge clusters which isn’t out of line with what I’ve heard from our internal teams that push big result sets from EMR back to S3. Good enough in my book.
It’s important to note that booting a cluster from a snapshot always yields the same node type and count, meaning you can’t up- or down-grade a cluster from a snapshot. Once you have a snapshot, it’s actually very fast to boot a cluster from it. In my experience it took about 20 to 30 minutes which just seemed insane until I realized that the cluster seems to become available well before the “work” of loading the snapshot is complete. The dashboard shows a whole lot of CPU, network, and disk usage all before I submitted my first query.
Make no mistake, this is no phantom: those are real resources being used. I saw queries run significantly more slowly during this post-snapshot-load period, as well as a much less responsive web dashboard. (Oh, did I mention that? The web dashboard is querying directly to your cluster, so if your cluster is wedged on something, it’s almost impossible to debug it. Makes WLM all the more important.) This work usually took between 45 minutes to an hour to clear up, after which everything seemed to chug along just fine. I’d say it took a bit over an hour to get a cluster from snapshot to full-speed.
Resizing a cluster
In Redshift, resizing a cluster is basically an automated process of launching a new cluster, starting the data transfer from old to new in the background while answering new and existing queries, then seamlessly finishing the running queries and pointing all new ones at the new cluster. Sure there is some performance degradation of queries run during this period, but no more than I saw when running two concurrent queries. In fact, my experience resizing a cluster was nothing short of remarkable. (My tests were fairly limited, since running one test meant launching a cluster from a snapshot, waiting for the work to finish, launching a resize and then shutting down the cluster so I didn’t waste my testing credit. This whole process could take several hours start to finish, so I won’t pretend that I have anything more than anecdotal data here.) I saw an effective rate of about 175MB/sec transfer when upgrading from 2-node 8xlarge/16-node xlarge to 4-node 8xlarge/32-node xlarge clusters, meaning I looked up the amount of space Redshift reported using on disk and then divided that by the time between hitting the resize button and being able to run my first query on the new cluster. For my data sets, that meant 6-7 hours of degraded query performance (but not downtime!) followed by a seamless transition. Even query endpoints were seamlessly switched to the new cluster without my client even noticing! Not a bad deal, especially since you don’t even have to worry about the old cluster–it shuts down and gets cleaned up in the background.
So let’s review my crazy expectations and see how Redshift did.
- Per dollar, I want linear scaling. Within reasonable bounds (like an order-of-magnitude row count range), I found that to be true for loading, querying, snapshotting, and resizing.
- I want my dollar to be just as well-spent on a xlarge cluster as a 8xlarge cluster. For everything but querying, the 8xlarge nodes were about 8x an xlarge node. (But if you can get away with it, stick with xlarge clusters!)
- I want to load the marginal “day” in an hour and query it. Looks like an hour and a half is the real number. However, querying scaled linearly and without complaint once the COPY and VACUUM completed.
- I want to be able to painlessly and quickly add nodes to my cluster. A few clicks in the UI, wait a few hours, no downtime. Feels painless and quick to me!
- I want linear degradation in query times for parallel queries. Mostly true, until you crush the thing. Break it a few times to test the limits on your queries, then set up WLM and don’t worry about it. If you’re using this mostly for periodic reporting, then you probably won’t even notice.
- I want to be able to snapshot/boot quickly and easily. I honestly don’t know what kind of magic is going on that lets me boot a snapshot in an hour and then let me query 3TB of data, but I’ll take it, degraded performance and all.
Redshift knocked it out of the park, in my opinion. (And this is coming from AK, the “do-everything-streaming” peanut-gallery. If we’re convinced, that’s gotta count for something, right?) In fact, the appeal of Redshift is much like the appeal of the Summarizer to me: it takes a non-trivial business problem (executing expressive SQL over medium data) and completely undercuts the mainstream solutions’ price points by trading away generality for ease-of-use and performance.
And sure, it has some flaws: COPY failures, load-induced cluster crashes, dashboard slowness, and so on. But I don’t care. I found workarounds for all of them over the course of a few days. Moreover, my communication with the Redshift team has been nothing but constructive, and given what I heard the beta days were like, they’re making real progress. I have no doubt that the service is only going to get better and cheaper.
Oddly enough, Redshift isn’t going to sell because devs think it’s super-duper-whizz-bang. It’s going to sell because it took a problem and an industry famous for it’s opaque pricing, high TCO, and unreliable results and completely turned it on its head. MPP was never a bad idea. Selling that way was. Yeah, the effective TCO is closer to $5k/TB/year than it is to their stated $1k/TB/year, but the pricing scheme is transparent and it’s
half a quarter the price of the other MPP alternatives.
Now, rightfully, you could argue that it’s not Teradata or Vertica that it’s competing with anymore, but rather Hadoop. And clearly, it can’t do everything Hadoop can, but I contend that it doesn’t need to. All it needs to do is convince people that they don’t need Hive, and that isn’t a hard sell for a ton of businesses out there. Having vanilla SQL along with a familiar data model, and the added speed of a system built for these types of queries is probably justification enough to pick this over Hadoop+Hive if BI is what you’re after. The hosted/as-a-service aspect is just frosting on the cake at that point.
Query 1: Simple Aggregate
This query simulates the “wide” aggregates that the Summarizer generates. Specifically, it does multiple simple grouping aggregates and coalesces them with an outer join. It represents the simplest type of reporting we do.
WITH imps AS ( SELECT campaign_id, tracking_campaign_id, inventory_placement_id, audience_definition_id, creative_group_id, creative_id, SUM(1) AS raw_impression, COUNT(DISTINCT(ak_user_id)) AS uu_impression, SUM(media_cost) AS media_cost, SUM(data_cost) AS aggregate_attribute_data_cost FROM impression GROUP BY 1,2,3,4,5,6 ), clicks AS ( SELECT campaign_id, tracking_campaign_id, inventory_placement_id, audience_definition_id, creative_group_id, creative_id, SUM(1) AS raw_click, COUNT(DISTINCT(ak_user_id)) AS uu_click, 0::float8 AS click_revenue FROM click GROUP BY 1,2,3,4,5,6 ), a_conv_click AS ( SELECT campaign_id, tracking_campaign_id, inventory_placement_id, audience_definition_id, creative_group_id, creative_id, SUM(1) AS raw_click_attributed_conversion, COUNT(DISTINCT(ak_user_id)) AS uu_click_attributed_conversion, SUM(attributed_revenue) AS click_attributed_conversion_revenue FROM attributedconversion WHERE type_id = 1 GROUP BY 1,2,3,4,5,6 ), a_conv_imp AS ( SELECT campaign_id, tracking_campaign_id, inventory_placement_id, audience_definition_id, creative_group_id, creative_id, SUM(1) AS raw_impression_attributed_conversion, COUNT(DISTINCT(ak_user_id)) AS uu_impression_attributed_conversion, SUM(attributed_revenue) AS impression_attributed_conversion_revenue FROM attributedconversion WHERE type_id = 2 GROUP BY 1,2,3,4,5,6 ) SELECT COALESCE(imps.campaign_id , clicks.campaign_id , a_conv_click.campaign_id , a_conv_imp.campaign_id ) AS campaign_id , COALESCE(imps.tracking_campaign_id , clicks.tracking_campaign_id , a_conv_click.tracking_campaign_id , a_conv_imp.tracking_campaign_id ) AS tracking_campaign_id , COALESCE(imps.inventory_placement_id, clicks.inventory_placement_id, a_conv_click.inventory_placement_id, a_conv_imp.inventory_placement_id) AS inventory_placement_id, COALESCE(imps.audience_definition_id, clicks.audience_definition_id, a_conv_click.audience_definition_id, a_conv_imp.audience_definition_id) AS audience_definition_id, COALESCE(imps.creative_group_id , clicks.creative_group_id , a_conv_click.creative_group_id , a_conv_imp.creative_group_id ) AS creative_group_id , COALESCE(imps.creative_id , clicks.creative_id , a_conv_click.creative_id , a_conv_imp.creative_id ) AS creative_id , imps.raw_impression, imps.uu_impression, imps.media_cost, imps.aggregate_attribute_data_cost, clicks.raw_click, clicks.uu_click, clicks.click_revenue, a_conv_click.raw_click_attributed_conversion, a_conv_click.uu_click_attributed_conversion, a_conv_click.click_attributed_conversion_revenue, a_conv_imp.raw_impression_attributed_conversion, a_conv_imp.uu_impression_attributed_conversion, a_conv_imp.impression_attributed_conversion_revenue FROM imps FULL OUTER JOIN clicks ON imps.campaign_id = clicks.campaign_id AND imps.tracking_campaign_id = clicks.tracking_campaign_id AND imps.inventory_placement_id = clicks.inventory_placement_id AND imps.audience_definition_id = clicks.audience_definition_id AND imps.creative_group_id = clicks.creative_group_id AND imps.creative_id = clicks.creative_id FULL OUTER JOIN a_conv_click ON imps.campaign_id = a_conv_click.campaign_id AND imps.tracking_campaign_id = a_conv_click.tracking_campaign_id AND imps.inventory_placement_id = a_conv_click.inventory_placement_id AND imps.audience_definition_id = a_conv_click.audience_definition_id AND imps.creative_group_id = a_conv_click.creative_group_id AND imps.creative_id = a_conv_click.creative_id FULL OUTER JOIN a_conv_imp ON imps.campaign_id = a_conv_imp.campaign_id AND imps.tracking_campaign_id = a_conv_imp.tracking_campaign_id AND imps.inventory_placement_id = a_conv_imp.inventory_placement_id AND imps.audience_definition_id = a_conv_imp.audience_definition_id AND imps.creative_group_id = a_conv_imp.creative_group_id AND imps.creative_id = a_conv_imp.creative_id ;
Query 2: Session-walk Position Histogram (Population)
This query is the simplest demonstration of the expressivity of the SQL you can run on Redshift. The WITH and OVER clauses provide an encapsulated, session-based position (DENSE_RANK) for each user’s impressions, which are aggregated by reporting key and position. This allows us to see if particular advertisements tend to appear earlier or later in users’ sessions. (You may recognize queries like this from market basket analysis.)
WITH annotated_chains AS ( SELECT campaign_id, tracking_campaign_id, inventory_placement_id, DENSE_RANK() OVER (PARTITION BY ak_user_id ORDER BY record_date DESC) AS position FROM impression WHERE record_date >= some_date AND record_date < other_date ORDER BY ak_user_id, record_date DESC ) SELECT campaign_id, tracking_campaign_id, inventory_placement_id, position, COUNT(*) as ct FROM annotated_chains GROUP BY 1,2,3,4;
Query 3: Session-walk Position Histogram (Converters)
This query does the same thing as #2 but joins against the conversion table to construct a session that reaches 90 days back for each conversion event. This allows us to once again see if certain advertisements tend to be seen “close” to conversions.
WITH annotated_chains AS ( SELECT i.ak_user_id AS ak_user_id, i.campaign_id AS campaign_id, i.tracking_campaign_id AS tracking_campaign_id, i.inventory_placement_id AS inventory_placement_id, i.record_date AS record_date, DENSE_RANK() OVER (PARTITION BY i.ak_user_id ORDER BY i.record_date DESC) AS position FROM impression i JOIN unattributedconversion c ON c.ak_user_id = i.ak_user_id AND c.record_date >= i.record_date AND (c.record_date - interval '90 days') < i.record_date AND c.record_date >= some_date AND c.record_date < other_date ) SELECT campaign_id, tracking_campaign_id, inventory_placement_id, position, count(*) AS ct FROM annotated_chains GROUP BY 1,2,3,4;
Query 4: Session-walk Date Histogram (Population)
This query is the date-based version of #2. Instead of reporting a position-based offset in the session, it reports a day-offset from the end of the session. This query allows us to examine temporal distribution of different advertisements.
WITH annotated_chains AS ( SELECT campaign_id, tracking_campaign_id, inventory_placement_id, DATEDIFF(day, record_date, LAST_VALUE(record_date) OVER (PARTITION BY ak_user_id ORDER BY record_date ASC rows between unbounded preceding and unbounded following) ) AS days_behind_conversion FROM impression WHERE record_date >= some_date AND record_date < other_date ORDER BY ak_user_id, record_date DESC ) SELECT campaign_id, tracking_campaign_id, inventory_placement_id, days_behind_conversion, COUNT(*) as ct FROM annotated_chains GROUP BY 1,2,3,4;
Query 5: Session-walk Date Histogram (Converters)
This query is the date-based version of #3. Again, instead of position-based offsets, it reports day-offsets from conversion. This query explores temporal proximity of advertisements to conversions.
WITH annotated_chains AS ( SELECT i.ak_user_id AS ak_user_id, i.campaign_id AS campaign_id, i.tracking_campaign_id AS tracking_campaign_id, i.inventory_placement_id AS inventory_placement_id, i.record_date AS record_date, DATEDIFF(day, i.record_date, c.record_date) AS days_behind_conversion FROM impression i JOIN unattributedconversion c ON c.ak_user_id = i.ak_user_id AND c.record_date >= i.record_date AND (c.record_date - interval '90 days') < i.record_date AND c.record_date >= some_date AND c.record_date < other_date ) SELECT campaign_id, tracking_campaign_id, inventory_placement_id, days_behind_conversion, count(*) AS ct FROM annotated_chains GROUP BY 1,2,3,4;